Welcome to Associate Engineers  
Associate Engineers
  • Size: 2" (50 mm) to 36" (900 mm) and larger
    Swivel Joints are available in style 10 to 80 with various end-connections: threaded, flanged and butt weld in ANSI 150 to 300 Class pressure rating.

  • Designed as per API Specification Standard 6H

  • Material of Construction
         Carbon Steel (A 105 forging/ A515 or A516 Gr. 60/70), Aluminum (up to 4") and
         Stainless Steel 304/SS 316 (A 182 F304/316)

  • Heavy-duty load bearing capacity ball-bearing raceways harden to 375 BHN (equals to 38 Rockwell "C") through a special permanent metal hardness process.

  • Ball Bearing, fitted with two rows of wide-spread ball bearing (Chrome CS or SS)
    Combination of roller bearing with
    ball bearings units are also available.

  • Special Stainless Steel (SS) Lining

  • All CS Swivel Joints are supplied with Special Stainless Steel lining at the Main seal faces, on both Nipple and Housing for longer seal life and smooth rotation.
  • Seals Design
    Main seal of two different types (cross sections) O-Ring or Lip Seal.
         O-Ring type: Main Seal of O-ring cross section of Buna-n/Viton ® material and O-rings or
           Lip Seal type: Main Lip Seal of PTFE (Teflon ®) with Buna-n/Viton ® Insert and O-rings or
           Lip Seal type: Main Lip Seal of Buna-n/Viton ® and O-rings.
              A special inverted lip seal designs are also available.

  • Positive and Negative pressures
    Nipple (female) portion is specially dimensioned for the main seal to remain in the proper functioning position under both positive and negative pressure.

  • Designed to withstand temperature variations.
    A special low or high temperature applications are also available.

  • Factory Lubricated
    A Special wear resistant - High Temp. PTFE based lubricant or lubricated-for-life are also available.

  • Dust Proof

  • Hydro-testing and Special Testing

  • All Swivel Joints are Internally Hydro-tested at shop before shipping. The Air test, Vacuum test, Bending moment/Radial load test, Pull load test, Electrical conductivity test, Torque test, External Pressure test, and Life Cycle Test (US Patented) has been conducted during R&D (research and development) and these test can be conducted upon special request, at extra cost.


  TOP   Associate Engineers
Phone: (91 265) 2581045 /2581391 / 3291403
Fax: (91 265) 2580249
Email: associateeng@assen.co
Sales Inquires: sales@assen.co


HOME What's New Product and Services Product Testing Quality Program Product Support Company Profile Loading Arms LP Gas Loader Repair Clamps Swivel Joints Research and Development